Functioning Groups

Functioning groups are carbon compounds that contain other atoms besides just carbon and hydrogen.
They are very specific and each one is different with its own properties and reactivity.

The main Functioning Groups being focused on are
1) Halides and Nitro Compounds
2)Aldehydes and Ketones
3) Alcohols

 Halides and Nitro Compounds

How to name Halides:
Remember these prefixes.
Br-bromo
I-iodo
Cl-chloro
F-fluoro

For nitro compounds-

NO2-nitro

The same rules as naming alkanes apply.
In alphabetical order, state where its attached to the main parent. (e.g. 4) Then use the prefix.
Do this with as many as needed. Then finish with the length of the parent hydrocarbon.

E.g.

Naming: This has a parent hydrocarbon of three. Which makes it prop-. Because there are only single bonds, the ending is -ane(PROPANE) NO2 is present so we name it nitro and then place the position of the nitro in front of the word nitro.( in this case, 2)
So this is called 2-nitropropane.



Properties of halides:
1. Not soluble in water
2. I- compounds are more reactive
3. F-compounds unreactive
4. Cl and Br compounds vulnerable to chemical attack

Nitro compounds are nice to smell, not vulnerable to attack(unless very drastic conditions), water soluble and explosive!

Aldehydes and Ketones

Naming: Remember than an aldehyde always ends with -al and a ketone always ends with -one.
In an aldehyde the double bond with oxygen will always be on the last carbon in the chain.
In ketones it isn't.
It is named the same way all the others are named except with the new endings!!!!!

Alcohols
Alcohols are a functional group containing (OH) hydroxyl group.
NAMING:
First name the parent hydrocarbon group with ending-ol.
Then place the position of the OH group(the shortest possible) in front. Then do the rest how it is normally named with the alkyl groups.

First, name the parent hydrocarbon. So.. pentanol. Then check the position of the OH. In this case it is 3.

This is called 3-pentanol.

Note: OH makes alcohols soluble in water. The alcohols are all poisonous! Methanol, propanol and ethanol are highly soluble.

http://www.youtube.com/watch?v=tyMD_1gBLmg

http://www.youtube.com/watch?v=XHn0lLH9SSY&feature=related

We found these helpful.!!!! ENJOY

Alkenes and Alkanes

Today we learned about alkenes and alkynes.

They are different from alkanes because they can form double(alkene) and triple(alkyne) bonds.

Alkenes are formed with double bonds between carbon atoms and the ending is -ene.

Example.

Let us name this.
If this was an alkane, it would end in -ane and its name would be 2-methylpentane.
However it is an alkene as evidenced by the double bond.

Therefore the name is 4-methyl
Then you write the number of the carbon# the double bond comes after so 2-pent-ene

so the name of this compound is 4-methyl-2-pentene.

Alkynes are exactly the same as alkenes except when you name it, change the ending to -yne. They use triple bonds.

Name this.

First count the parent hydrocarbon.
=4 so Butane.
Then you take into account the triple bond so the name changes to butyne.

Since there are no branched hydrocarbons, nothing needs to be added except the position of the triple bond.
This is added in front of  the word butyne

It is 2-butyne.

http://www.youtube.com/watch?v=7XbYhjyUI-M

Organic Chemistry

Organic Chemistry is the study of compounds containing carbon. These compounds can be formed in several ways, and may appear in a straight line, circular or branched pattern. They also have low melting points. To combine with other atoms they can form single,double or triple bonds.

 A hydrocarbon is a compound containing only carbon and hydrogen.
Alkane: A saturated hydrocarbon involving only single bonds.

Here are some examples of alkanes:

The chemical formula for alkanes is CNH2N+2

Methane: CH4
Ethane: C2H6
Propane : C3H8
Butane: C4H10

* An alkyl group is an alkane that loses an atom of hydrogen.

A branched hydrocarbon is a hydrocarbon attached to the original carbon atom.

Chemical Bonding

Chemical bonding is molecules and atoms being attracted to each other and this allows them to combine to form chemical compounds.

There are 3 types of bonding:

Ionic Bonding: Is the transfer of atoms to form positive or negative ions.
Non-Polar Covalent Bonding- Is the unequal sharing of electrons
Polar Covalent Bonding : sharing of electrons equally.

IONIC:

Ionic bonding involves metal and non-metals. The force that powers ionic bonding is called the electrostatic force, which is the attraction or repulsion of charged particles. Electronegativity is also an important concept behind this bonding. Metal electronegativity is low and non metal electronegativity is high. As result, a high ionization energy is created. To determine how electrons are shared, electronegativity difference must be found.

ENeg Diff= ENeg 1 - ENeg 2
ENeg Diff  less than 0.5 it is a non polar
ENeg Diff greater than 0.5 and less than 1.8 is is polar covalent bond
 ENeg Diff greater than 1.8 is it ionic

Polarity: is the electrical balance or imbalance of the molecule. If the molecule is electrically unbalanced, then it is polar. This is caused by electronegativity. If the EN is high, the shared electrons will be pulled more to the atom. A partial negative results from high electronegativity and a partial positive results from a  low one.

In a Non- polar bond, it is one of the simplest, only involving the sharing of electrons to create full valence shells. Intramolecular forces in the molecule hold the atoms of the molecule together.
However, intermolecular forces act between molecules and are responsible for bonding.

A London force is a weak intermolecular force. They occur because of temporary dipolar attractions. A dipole is when one side is slightly positive and the other side is slightly negative ,creating partial separation.

Drawing Electron Dot Diagrams and Lewis Dot Diagrams

Let us examine an example of an electron dot or Lewis diagram.

1. The centre of the diagram, the atomic symbol represents the nucleus.
2. Each dot represents an electron in an electron dot diagram. These are only the valence electrons, or the electrons in the outermost shell.
3. In a Lewis diagram, lines represent a  bond between two electrons.

Here is an example. Because Nitrogen has 5 valence electrons and hydrogen has 1. Hydrogen needs 1 electron to become full and nitrogen needs 3.
Therefore, in NH3, N and H share electrons so that H is full with 2. and N, being surrounded on 3 sides gets 3 electrons.


In a structural diagram, electron bonds can be represented with a ---(line)


In Ionic compounds:

As you can see here, sodium has 1 valence electron and chlorine has 7.
Sodium and chlorine both want to become happy, and they are attracted to each other. The sodium loses its valence electron and becomes (+)1 charge. Chlorine takes this electron and fills it valence shell, giving it a (-1) charge.  Therefore, this is how the Lewis diagram is shown.



Extra help!

http://www.youtube.com/watch?v=y6QZRBIO0-o
http://www.youtube.com/watch?v=QKoA3fZ29B0

Periodic Trends

As we examine the periodic table each elements have certain characteristics and looking at the periodic table as a whole, some trends are noticed.

Recall that Dmitri Mendeleev created a periodic table of the 63 known elements which he arranged by atomic mass.

First we must know some important vocab.

Density: of an object is its mass per unit volume. It increases as the atomic numbers increase.
Ionization energy: is the energy needed to remove electrons from an atom. It increases as you go across a period(left----> right) and decreases as you go down in families.

Melting and Boiling Points: This is the temperature at which an object liquefies and  becomes a gas respectively.
These properties increase as you go from bottom to top in a group.

Electronegativity: This is the tendency of an atom or functional group to attract electrons towards itself(form negative ions) In increases left------------->right

Atomic Radius: Is the measure of the size of an atom. It decreases left to right and increases going down.

Valence Electrons

Valence electrons are the electrons that exist on the outermost shell of an atom.
Are the ones involved in chemical reactions

An open shell is a shell that has less than the maximum amount of electrons in it.
A closed shell is a shell that is completely full with the max. amount of electrons that can occupy it.

How to determine the number of valence electrons from electronic configurations:

Sodium: has 11 electrons.

1s^2 2s^2 2p^6 3s^1

Now we must put it into core notation:
[Ne] 3s^1

When counting valence electrons, only the s and p subshells are considered, unless the d and f subshells are full.

Therefore, Na has one valence electron.

http://www.youtube.com/watch?v=1TZA171yxY4&feature=fvwrel

Cheers