Last class was a review class in preparation for the test coming up on:
Mon. Jan. 17, 2011
On the test:
Molecular Formula
Calculating Empirical Formula of an Organic Compound
Percent Composition
Molarity
Diluting Solutions to Prepare Workable Solutions
Standard Temperature and Pressure
I think thats it
GOOD LUCK
Monday, January 17, 2011
Tuesday, January 11, 2011
STP
STP stands for Standard Temperature and Pressure and is used to compare volumes of gases.
It is = 1 atm(atmosphere) of pressure at 0 degrees celsius or 273.15 K.
@ STP= 22.4 L IS EQUAL TO 1 MOLE OF GAS
The two conversion factors are:
1 mol of gas/ 22.4 L & 22.4 L / 1 mol of gas
Here are some examples:
A cylinder contains 14.05 moles of gas at STP. What is the volume of the gas?
14.05 moles x 22.4 L/1 mol = 315 L
It is = 1 atm(atmosphere) of pressure at 0 degrees celsius or 273.15 K.
@ STP= 22.4 L IS EQUAL TO 1 MOLE OF GAS
The two conversion factors are:
1 mol of gas/ 22.4 L & 22.4 L / 1 mol of gas
Here are some examples:
A cylinder contains 14.05 moles of gas at STP. What is the volume of the gas?
14.05 moles x 22.4 L/1 mol = 315 L
Monday, January 10, 2011
Welcome Back Fans!!!
I truly couldn't wait for this moment. The time to write another blog. May I add in 2011? Wow. Speechless. I do not think I can do this. The thrill, the hype, to do something I have not done in a month? Heck, this is going to be one greasy, sloppy, embarrassing blog. All I can say, Preet did it.
Enough about that, I hope everyone else had a fantastic break, and now, it is time to show what exactly when down last class.
Last class we learned material about "Molar Concentration", aka "Molarity of Solutions". It is the concentration measured by the number of moles of solution found in the solution, for every liter.
The Formula for it is..........M = mol/L
To find the moles, it is........mol = M X L
and for the Volume............L= mol/M

Now of the thousands of you guys who read this blog, I am sure that plenty of you top followers are well aware that I am not a fan of showing examples, but today, why not. Here are 2 fresh from the crew! Actually one, because one is more efficient for both you the reader and me the writer.
First Example: What is the molarity of 5.30 g of Na2CO3 dissolved in 400 mL of solution?
First you must find the number of moles contained in 5.30 g of Na2CO3
5.30 x 1mol/ 106.0 u = 0.05
Then, since M= mol/L the equation is 0.05/0.4(400 ml in L)= 0.125M
Last Example!!! Only one more to go!!! Wahoooo!!!!
Ex. 2. How many grams of Ca(OH)2 are needed to make 100.0 mL of 0.250 M solution?
Find out moles in by using equation mol = ML
= (0.250 M)(0.1 L) = 0.204 mol
Then convert!
0.204 x 74.1/1mol = 1.85 grams of Ca(OH)2
If you're stuck this will help :)
http://www.youtube.com/watch?v=jxSoR8RJDW0&playnext=1&list=PLCDA5A8493EB5AE7E&index=10
Enough about that, I hope everyone else had a fantastic break, and now, it is time to show what exactly when down last class.
Last class we learned material about "Molar Concentration", aka "Molarity of Solutions". It is the concentration measured by the number of moles of solution found in the solution, for every liter.
The Formula for it is..........M = mol/L
To find the moles, it is........mol = M X L
and for the Volume............L= mol/M
Now of the thousands of you guys who read this blog, I am sure that plenty of you top followers are well aware that I am not a fan of showing examples, but today, why not. Here are 2 fresh from the crew! Actually one, because one is more efficient for both you the reader and me the writer.
First Example: What is the molarity of 5.30 g of Na2CO3 dissolved in 400 mL of solution?
First you must find the number of moles contained in 5.30 g of Na2CO3
5.30 x 1mol/ 106.0 u = 0.05
Then, since M= mol/L the equation is 0.05/0.4(400 ml in L)= 0.125M
Last Example!!! Only one more to go!!! Wahoooo!!!!
Ex. 2. How many grams of Ca(OH)2 are needed to make 100.0 mL of 0.250 M solution?
Find out moles in by using equation mol = ML
= (0.250 M)(0.1 L) = 0.204 mol
Then convert!
0.204 x 74.1/1mol = 1.85 grams of Ca(OH)2
If you're stuck this will help :)
http://www.youtube.com/watch?v=jxSoR8RJDW0&playnext=1&list=PLCDA5A8493EB5AE7E&index=10
Saturday, January 8, 2011
Dilution of Solutions
We learned about how to dilute solutions
Diluting is when water is added to a solution, which increases volume but decreases concentration of the solution(molarity)
Here is the formula needed to solve these dilution problems:
(Molarity 1) (Volume(in L)1) = (Molarity 2) ( Volume(in L) 2)
or M1L1= M2L2
Here are some examples:
1. 20.0 ml of 0.200 M NaOH solution is diluted to a final volume of 100.0 mL. Calculate the new concentration.
All you do is plug in the numbers.
20.0 mL is initial volume
0.200 M is initial molarity
100.0 mL is final volume
(0.200 M) (0.02 L) = (M2) ( 0.1 L)
= 0.200x 0.02/0.1= 0.04 M
2. 150.0 ml of 0.025 M NaOH solution is added to 150.0 mL of water. Calculate new molarity.
150.0 mL = initial volume
0.025M = initial molarity
Now, final volume is 150 mL + 150 mL = 300 mL
M1L1=M2L2
(0.025 M) (0.15 L) = (M2) ( 0.3 L)
0.025 x 0.15/ 0.3= 0.012 M
http://www.youtube.com/watch?v=0dRwHZCDBp4
Extra help!
Diluting is when water is added to a solution, which increases volume but decreases concentration of the solution(molarity)
Here is the formula needed to solve these dilution problems:
(Molarity 1) (Volume(in L)1) = (Molarity 2) ( Volume(in L) 2)
or M1L1= M2L2
Here are some examples:
1. 20.0 ml of 0.200 M NaOH solution is diluted to a final volume of 100.0 mL. Calculate the new concentration.
All you do is plug in the numbers.
20.0 mL is initial volume
0.200 M is initial molarity
100.0 mL is final volume
(0.200 M) (0.02 L) = (M2) ( 0.1 L)
= 0.200x 0.02/0.1= 0.04 M
2. 150.0 ml of 0.025 M NaOH solution is added to 150.0 mL of water. Calculate new molarity.
150.0 mL = initial volume
0.025M = initial molarity
Now, final volume is 150 mL + 150 mL = 300 mL
M1L1=M2L2
(0.025 M) (0.15 L) = (M2) ( 0.3 L)
0.025 x 0.15/ 0.3= 0.012 M
http://www.youtube.com/watch?v=0dRwHZCDBp4
Extra help!
Monday, December 13, 2010
Lab 4C December 9, 2010
On Thursday December 9, 2010, we did a lab in Chemistry Class. It was 4C: Formula of a Hydrate.
First, we heated the crucible for 5 minutes to make sure it was dry and there was no moisture contained in it. Then we took some hydrate and put it in the crucible and weighed it, and recorded it.
We heated the hydrate for 5 minutes and recorded our observations. The hydrate became bluish white in colour. After 5 minutes we weighed it again and found that it had gotten lighter because all of the water it contained was gone. It was now a anhydrous salt.
A hydrate is a water containing compound.
Copper (II) Sulfate Pentahydrate
CuSO4 * 5H2O

An anhydrous salt is a salt that has been heated up until all of the water it contains has evaporated.
We repeated the experiment twice and found that both times the mass was the same
After we added a couple of drops of water and a reaction took place.
The salt turned blue and gas was released
We learned that this water caused the salt to turn back into a hydrate.
First, we heated the crucible for 5 minutes to make sure it was dry and there was no moisture contained in it. Then we took some hydrate and put it in the crucible and weighed it, and recorded it.
We heated the hydrate for 5 minutes and recorded our observations. The hydrate became bluish white in colour. After 5 minutes we weighed it again and found that it had gotten lighter because all of the water it contained was gone. It was now a anhydrous salt.
A hydrate is a water containing compound.
CuSO4 * 5H2O
An anhydrous salt is a salt that has been heated up until all of the water it contains has evaporated.
We repeated the experiment twice and found that both times the mass was the same
After we added a couple of drops of water and a reaction took place.
The salt turned blue and gas was released
We learned that this water caused the salt to turn back into a hydrate.
Monday, December 6, 2010
Calculating Empirical Formula of Organic Compounds December 3rd, 2010
The empirical formula of an organic compound can be found by:
-burning the compound(reacts with O2)
- collecting and weighing products
-from mass of products, moles of each element in the original organic compound can be calculated.
What is the difference between empirical and molecular?

What is the empirical formula of a compound whose composition is 45.28% Carbon, 6.289% Hydrogen, 35.22% O and 13.21% Nitrogen?
mol C = 45.28 g x 1 mol/12.0 g C = 3.777 mol
mol H = 6.289 g H x 1 mol/ 1 g = 6.289 mol H
mole O = 35.22 g O x 1 mole/16.0 g = 2.2 mol
mole N = 13.21 g N x 1 mole/ 14.0 g = 0.944 mol
Divide by smallest molar amount
3.777/0.944= 4 x 3 = 12
6.289/ 0.944 = 6.6 x 3 = 20
2.2/ 0.944= 2.33 x3 = 7
0.944/0.944 = 1 x3 =3
= C12H20O7N3
A compound contains 92.26% Carbon and 7.74 % H
What is the empirical formula?
*Assume there are 100 g
92.26 g C x 1 mole/ 12.0 g = 7.688 mol
7.74 g H x 1 mole/1.0 g = 7.74 mol
Divide by smallest amount
7.74/7.688 = 1
7.688/7.688 = 1
Ratio of C to H = 1:1
= C1H1
= CH
http://www.youtube.com/watch?v=MpkGRCFJ_pQ
Cheers!
-burning the compound(reacts with O2)
- collecting and weighing products
-from mass of products, moles of each element in the original organic compound can be calculated.
What is the difference between empirical and molecular?
What is the empirical formula of a compound whose composition is 45.28% Carbon, 6.289% Hydrogen, 35.22% O and 13.21% Nitrogen?
mol C = 45.28 g x 1 mol/12.0 g C = 3.777 mol
mol H = 6.289 g H x 1 mol/ 1 g = 6.289 mol H
mole O = 35.22 g O x 1 mole/16.0 g = 2.2 mol
mole N = 13.21 g N x 1 mole/ 14.0 g = 0.944 mol
Divide by smallest molar amount
3.777/0.944= 4 x 3 = 12
6.289/ 0.944 = 6.6 x 3 = 20
2.2/ 0.944= 2.33 x3 = 7
0.944/0.944 = 1 x3 =3
= C12H20O7N3
A compound contains 92.26% Carbon and 7.74 % H
What is the empirical formula?
*Assume there are 100 g
92.26 g C x 1 mole/ 12.0 g = 7.688 mol
7.74 g H x 1 mole/1.0 g = 7.74 mol
Divide by smallest amount
7.74/7.688 = 1
7.688/7.688 = 1
Ratio of C to H = 1:1
= C1H1
= CH
http://www.youtube.com/watch?v=MpkGRCFJ_pQ
Cheers!
Empirical Formula
The Empirical formula gives the lowest term ratio of atoms (or moles) in the formula.
All Ionic compounds are empirical formula.
A compound contains 80% C and 20 % H?
What is its empirical formula?
*Assume you have 100 g
80.0 g of C x 1 mole/ 12.0 g = 6.6666 mol
20.0 g of H x 1 mole/1 = 20.0 mol
Divide by smallest mole amount
20.0/6.6666= 3
6.6666/6.6666=1
= ratio of C to H is 1 to 3 = CH3
Here are some examples to help you!!!1
http://www.chem.tamu.edu/class/majors/tutorialnotefiles/empirical.htm
A great video!!!
http://www.youtube.com/watch?v=FWozjZ20JyA
Enjoy!!!
Chapter test is December 7, 2010
All Ionic compounds are empirical formula.
A compound contains 80% C and 20 % H?
What is its empirical formula?
*Assume you have 100 g
80.0 g of C x 1 mole/ 12.0 g = 6.6666 mol
20.0 g of H x 1 mole/1 = 20.0 mol
Divide by smallest mole amount
20.0/6.6666= 3
6.6666/6.6666=1
= ratio of C to H is 1 to 3 = CH3
Here are some examples to help you!!!1
http://www.chem.tamu.edu/class/majors/tutorialnotefiles/empirical.htm
A great video!!!
http://www.youtube.com/watch?v=FWozjZ20JyA
Enjoy!!!
Chapter test is December 7, 2010
Subscribe to:
Posts (Atom)