Tuesday, February 15, 2011

Quiz

We had a quiz today in Chemistry.

It was on balancing and predicting products of chemical equations
It covered everything we had been learning until now.
Types of reactions
Prediction Products
Net Ionic Equations
Solubility
Balancing equations


It was fun!

Wednesday, February 9, 2011

Advanced Double Replacement

Remember double replacement?
Now we have double replacement with solubility.

Now we have to put the states of matter signs beside in compound in a balanced equation
E.g. (g), (l), (aq), (s)


Lets take a double replacement reaction.

2 K3PO3 + 3Cu(NO3)2 -------> 1Cu3(PO3)2 + 6 KNO3

http://nobel.scas.bcit.ca/chem0010/unit8/solubilityRules.htm Here are the solubility rules:

Look at the products. Use the solubility sheet to see whether Cu will react with PO3. Do the same for K and NO3
Since Cu and PO3 do not react, they are a solid (s).
K and NO3 do react and will be (aq)
It will look like this:

2K3PO3 + 3 Cu(NO3)2 ------> 1 Cu3(PO3)2 (s) + 6 KNO3(aq)

The equation will look like this

2K3PO3 (aq) + Cu(NO3)2(aq) -----> 1 Cu3(PO3)2 (s)  + 6 KNO3(aq)

Sunday, February 6, 2011

Lab 5 B

Today we did a great lab in class:

There were 7 reactions that we observed and each one was amazing!

Here they are:

Reaction 1: We held a piece of copper wire in the hottest part of a bunsen burner flame for several minutes and recorded our observations:

Reaction 2: We took a nail, and cleaned it, then we submerged half the nail in liquid copper (II) sulfate solution. 15 minutes later, the part of the nail that was submerged was coated with copper.

Reaction 3: We heated some copper (II) sulfate(s) as we have already done(we are experts) and dried it out completely. It turned greyish,blue and was grainy and dry

Reaction 4: We added water to the anhydrous salt! Remember what happens:??? You get the hydrate back.

Reaction 5: We took 2 test tubes, one contained CaCl2(l) and the other Na2CO3(l) and we poured the calcium chloride into the sodium carbonate.

Reaction 6: We took mossy, fuzzy zinc and submerged it in hydrochloric acid.

Reaction 7: Manganese (IV) oxide is added to hydrogen peroxide. We tested the gas by placing a burning splint into the test tube. It lit up!

http://www.youtube.com/watch?v=ARRCD_Ry4eI  #1
http://www.youtube.com/watch?v=oQz5YEsx7Fo #6

Sorry we couldn't find them all!

Saturday, February 5, 2011

More Chemical Reactions

Today we learned about three more types of chemical reactions.
These were Combustion, Neutralization and Double Replacement.

Combustion: A process where a substance reacts with oxygen 

 The formula looks like this: AxBy + O2 -------> AO + BO

Here is an example of an equation which is a combustion reaction

__C7H6O2 + __O2(g) ----> ___CO2(g) + __H20 (l)

As you can see, a compound reacts with oxygen to produce carbon dioxide and water.

Now if we were to balance this it would look like:

2 C7H6O2 + 15 O2(g) -----> 14CO2(g) + 6 H2O(l)

Double Replacement:
This reaction is similar to single replacement except that it involves two compounds and either both non metal or metal compounds trade places:

AB + CD ------> AD + CB

Eg. Na2CO3 + CaCl2--> CaCO3 + 2NaCl
This is the balanced equation for a double replacement reaction:
As you can see,  the carbonate CO3 and the Chloride exchanged places .




Neutralization: This occurs in acid and base interaction , they cancel each other out = neutralization

HA + BOH ----> H2O + BA

The product is water and a salt.

Here is an example:

H2SO4 + Fe(OH)2-----> H2O + FeSO4
Balance:  1 H2SO4 + 1 Fe(OH)2 ----> 2H2O + 1 FeSO4



Here are some helpful videos http://www.youtube.com/watch?v=tE4668aarck
Here is a video that demonstrates combustion :http://www.youtube.com/watch?v=2wIz0oIZWZk

Sunday, January 30, 2011

Types of Reactions

Today we learned about the different kinds of chemical reactions that can occur. They are easily identifiable because each follows a specific pattern.

Synthesis:

A synthesis reaction is one in which two substances react to form a single substance.

Thus the equation A + B -------> AB

An example of a synthesis reaction is

__Ca + __CO3 -----> __CaCO3
As you can see, two substances combine to form one.
The balanced equation is

1 Ca + 1 CO3 ------> 1 CaCO3


Single Replacement

A single replacement reaction involves a compound and and element where atoms from the compound exchange places with the single element.

Thus the equation, AB + C = AC + B

An example of a single replacement reaction is
__NaCl + __I2 ------> __NaI + __Cl2

As you can see ,the iodine(non metal) traded places with the non metal in the NaCl equation, chlorine.

Balance : 2 NaCl  + 1 I2 -----> 2 NaI + 1 Cl2


Decomposition:

As the name implies, it is the breaking down of a substance into two different substances.

Therefore, the equation looks like

AB-----> A + B

An example of a decomposition reaction is

__KNO3 ---> ___KNO2 + __O2

The potassium nitrate breaks down into potassium nitrite and oxygen.

Balance! 2 KNO3 ------> 2 KNO2 + 1 O2

Here are some helpful links!
http://chemistry.about.com/library/formulabalance.pdf For extra practice!


A very visual demonstration http://www.youtube.com/watch?v=tE4668aarck

Tuesday, January 25, 2011

Balancing Chemical Equations

Today we learned about balancing chemical equations.

Remember: the mass of the reactants is always equal to the mass of the products. Mass cannot be created or destroyed.
Eg.
BALANCE:
__ Fe(s) + __ O2(g) -----> __Fe2O3(g)

We must always make sure that the number of atoms of each element on one side equals the number on the other side of the arrow.

Before:               After:

1 Fe                 2 Fe
2 O                  3 O

First balance the Oxygen.

The common multiple is 6 so you put 3 O2 and 2 Fe2O3
Now you have 6 oxygen atoms.

All that's left is the Fe(s). Because you put a 2 in front of Fe2O3, that means that Fe2 is multiplied by 2 which means you have 4 Fe. So that is what you put in front of Fe(s)

The balanced equation is... 4 Fe(s) + 3 O2-----> 2 Fe2O3


 Its very simple!!!!! All it requires is logic and basic multiplication skills.
http://www.youtube.com/watch?v=RnGu3xO2h74


That is a great video that we found useful
Good luck!                                                                       

Friday, January 21, 2011

Translating Word Equations and Naming Compounds.

Just a quick review..

Translating word equations:

Lets say you have the equation

Magnesium + Chlorine ----> magnesium chloride

Now since magnesium and chlorine are not compounds it is very simple to write their symbols.
Remember that chlorine is diatomic.

so Mg + Cl2 -----> magnesium chloride
This is where the charges come in!

Mg = 2 +
Cl = 1-

All you have to do is combine them in proportional ways according to their charge .

You will need 2 Cl to make one Mg. So, that means that there will be one Mg and 2 Cl

therefore the equation is MgCl2.

Naming Compounds

Simple Ionic compounds are very easy. All you do is say the first element and then add the prefix -ide to the end of the non metal and drop the original ending.

for example
NaCl is sodium chlor-ide.

CuS2 is copper sulph-ide.

For the polyatomic ions such as sulphate or phosphate you simply look up the formula unless you know it by heart,(SO4, PO4) then you just combine whatever elements you are using according to charge. Everything stays the same.

Covalent Compounds are two non metals. Here you need different prefixs depending on the number subscripts beside each element.

1-mono
2-di
3-tri
4-tetra
5-penta
6-hexa
7-hepta
8-octa
9-nona
10-deca

The second non metal in the formula always ends with -ide.

If the first non metal does not have a subscript beside it, it means that it is just one. You do not need to say mono. at the beginning.

2 examples:

NF2 is nitrogen di-fluoride

C3S4 is tricarbon tetrafluoride.

http://www.youtube.com/watch?v=ww_hvRH0Luk Naming compounds.

These are word equations ...